|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPECIFICATIONS FOR 300W ATX SWITCHING POWER SUPPLIES
-------------------------------------------------------------------------------------------------------------------------------------
|
MODEL: VP-C/300 |
|
DATE: 2002/08/09 |
|
REV: A (ATX12V) |
|
CHECK BY: Hu |
1. INPUT
|
1-1 |
AC INPUT VOLTAGE |
90 TO 132 VAC OR 180 TO 264 VAC |
|
1-2 |
AC INPUT FREQUENCY |
50 TO 60 HZ |
|
1-3 |
AC INPUT CURRENT |
6A RMS MAX.
FOR 115 VAC |
|
1-4 |
MAXIMUM INRUSH CURRENT |
40A FOR 110 VAC COLD START |
2. OUTPUT
|
OUTPUT1 |
OUTPUT 2 |
OUTPUT 3 |
OUTPUT 4 |
OUTPUT5 |
OUTPUT 6 |
||
|
2-1 |
VOLTAGE |
+5V DC |
-5V DC |
+12V DC |
-12V DC |
+3.3V DC |
+5V SB |
|
2-2 |
RIPPLE & NOISE |
50mV |
100mV |
120mV |
120mV |
50mV |
50mV |
|
2-3 |
LINE REGULATION |
+ 1% |
+ 1% |
+ 1% |
+ 1% |
+ 1% |
+ 1% |
|
2-4 |
TOLERANCE |
+ 5% |
+ 10% |
-5+7% |
+ 10% |
+ 5% |
+ 5% |
|
2-5 |
OUTPUT VOLTAGE |
4.75~5.25 |
-4.50~-5.5 |
11.4~12.8 |
-10.8~-13.2 |
3.14~3.46 |
4.75~5.25 |
|
2-6 |
MAXIMUM CURRENT |
30A |
0.5A |
18A |
0.5A |
20A |
2A |
|
2-7 |
MINIMUM CURRENT |
1A |
0A |
0.3A |
0A |
0.3A |
0A |
|
2-8 |
+3.3V & +5V 165W MAX. |
||||||
3. FEATURE
|
3-1 |
SHORT CIRCUIT PROTECTION |
ALL OUTPUTS EQUIPPED WITH SHORT CIRCUIT PROTECTION |
|
3-2 |
OVER POWER PROTECTION |
PEAK POWER PROTECTED TO BETWEEN 150% |
|
3-3 |
OVER VOLTAGE PROTECTION |
+5V=5.7V~6.5V,+12V=13.4V~15.6V,+3.3V=3.9V~4.3V |
4. OVERALL PERFORMANCE
|
4-1 |
TOTAL OUTPUT POWER |
300W CONTINUOUS MAXIMUM AT FULL LOAD |
|
4-2 |
EFFICIENCY |
65% MINIMUM AT FULL LOAD |
|
4-3 |
HOLD UP TIME |
14 mSEC
AT MAXIMUMLOAD AND |
|
4-4 |
STABILITY |
+ 0.5% AFTER 24 HOURS WARM UP |
|
4-5 |
POWER GOOD |
TTL COMPATIBLE SIGNAL OUT WITH 100 mSEC TO 500 mSEC DELAY AFTER POWER SET UP; POWER GOOD SIGNAL TURN TO LOW AT LEAST 1 mSEC BEFORE +5V DROP BELOW 4.75V |
5. ENVIRONMENTAL CONDITIONS
|
5-1 |
OPERATING TEMPERATURE |
10 TO 50 DEGREE |
|
5-2 |
COOLING |
BY FORCED AIR |
|
5-3 |
STORAGE TEMPERATURE |
-40oC TO+ 70oC |
|
5-4 |
STORAGE HUMIDITY |
OPERTING TO 85% RELATIVE HUMIDITY NON-OPERATING TO 95% RELATIVE HUMIDITY |
6. SAFETY STANDARD
UL,CUL,TUV,CB,S,N,D,FI
7. EMI STANDARDS
8. DIELECTRIC WITHSTAND VOLTAGE
|
8-1 |
INPUT TO GROUND |
2121 VDC 1 min 10 mA |
|
8-2 |
INPUT TO OUTPUT |
4242 VDC 1 min 10 mA |
9. INSULATION RESISTANCE
|
9-1 |
INPUT TO GROUND |
>50M£[ MINIMUM |
|
9-2 |
INPUT TO OUTPUT |
>50M£[ MINIMUM |
10. RELIABILITY
10-1 MEAN TIME BETWEEN FAILURE: 30K HOURS AT 25oC AMBIENT.
11. DC OUTPUT CONFIGURATION
MAIN POWER CONNECTOR P1 20PIN
|
PIN OUTPUT COLOR |
COLOR OUTPUT PIN |
|
|
1 +3.3VDC ORANGE 2 +3.3VDC ORANGE 3 COM BLACK 4 +5VDC RED 5 COM BLACK 6 +5VDC RED 7 COM BLACK 8 POK GRAY 9 +5Vsb PUPPLE 10 +12V DC YELLOW |
ORANGE +3.3V DC 11 BLUE -12V DC 12 BLACK COM 13 GREEN PS-ON 14 BLACK COM 15 BLACK COM 16 BLACK COM 17 WHITE -5V DC 18 RED +5V DC 19 RED +5V DC 20 |
|
AUX POWER CONNECTOR P2 6PIN
|
PIN OUTPUT COLOR |
|
1 COM BLACK 2 COM BLACK 3 COM BLACK 4 +3.3VDC ORANGE 5 +3.3VDC ORANGE 6 +5VDC RED |
+12V POWER CONNECTOR P3 4PIN
|
PIN OUTPUT COLOR |
COLOR OUTPUT PIN |
|
|
1 COM BLACK 2 COM BLACK |
YELLOW +12V 3 YELLOW +12V 4 |
|
12. CHASSIS MECHANICAL DIMENSION:
150*140*86 mm